Hood lock cable, removing and installing: Notes
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen Golf, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, and 1998 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Do not re-use fasteners that are worn or deformed in normal use.
- Some fasteners are designed to be used only once, and are unreliable and may fail if used a second time. This includes, but is not limited to, nuts, bolts, washers, circlips and cotter pins. Always follow recommendations in this manual - replace these fasteners with new parts where indicated, and any other time it is deemed necessary by inspection.
NOTE:
The following list refers to Fig 1.
- - Release lever
- Cable attached
- - Self-tapping screw
- - Sealing grommet
- - Clip
- - Cable
- - Lock
- Cable attached
- - Self-locking bolt
- Always replace
- 14 N.m (10 ft lb)
- - Spreader clip