Available shims
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
AVAILABLE SHIMS (OUTPUT SHAFT)
| Size (mm) | Part no. |
|---|---|
| 0.65 0.70 0.75 0.80 |
020 311 391 P 020 311 391 Q 020 311 391 020 311 391 A |
| 0.85 0.90 0.95 1.00 |
020 311 391 B 020 311 391 C 020 311 391 D 020 311 391 E |
| 1.05 1.10 1.15 1.20 |
020 311 391 F 020 311 391 G 020 311 391 H 020 311 391 J |
| 1.25 1.30 1.35 1.40 |
020 311 391 K 020 311 391 L 020 311 391 M 020 311 391 N |
CAUTION:
Part numbers are listed for reference only. Always check with your Parts department for the latest information.
- Install selected shim -S3- (1.15 mm in example above) and drive tapered roller bearing outer race into clutch housing (see DETERMINING THICKNESS OF SHIM S3 ).
- Lubricate tapered roller bearing with gear oil and install output shaft.
- Tighten bolts for bearing cover to tightening torque.