Screws, bolts, and nuts
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen and tighten all cover and housing fasteners in a diagonal pattern.
- Especially sensitive parts such as clutch pressure plates must not be distorted. Loosen and tighten fasteners in stages, in a diagonal pattern.
- Always replace self-locking bolts and nuts.