LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (5 SPD. Manual Transmission 020 (A3 Platform)) >> Clutch >> Clutch control, servicing >> Clutch cable, removing and installing >> Balance weight modification

Balance weight modification

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Beginning August, 1993, a balance weight will be attached to the clutch release lever in cases where excessive noise and vibration are transferred to the clutch pedal.

NOTE: The new balance weight can be installed on current vehicles as necessary to address complaints about clutch pedal noise and vibration.
Fig 1: Identifying Balance Weight Modification
G03361857Courtesy of VOLKSWAGEN OF AMERICA, INC.