Modified 1st gear synchronization from transmission build date 02 05 0: Notes
WARNING: This page is about a different variant/trim than selected.
Fig 1: Exploded View Of Modified 1st Gear Synchronization Components (From Transmission Build Date 02 05 0)
The following components have been added or modified:
- A- Inner ring
- B- Outer ring
- C- Synchro-ring
with additional recesses -4- for the lugs -1- of inner ring -A-.
- 1st gear
with additional recesses -3- for the lugs -2- of outer ring -B-.
NOTE:
- For the 2nd gear the same inner ring, outer ring and synchro ring are installed.
- If the components are not replaced, ensure they are reallocated to the original gear.