Test-ID $05 (05): Tank Ventilation System, Tank Vent Valve Function Check

WARNING: This page is about a different variant/trim than selected.

Connect the scan tool.
Start the engine and run at idle.
Select "Mode 6: Check test the results of components that are not continuously monitored".

Select "Test-ID $05 (05)".

Select the desired "Test-ID (TID)" or "Hex-ID".
Check specified values at idle.

Test-ID (TID) (Hex-ID)	DTC	Component or System	Min.	Max.	Additional Information
07 ($07)	P0441	Fuel Tank Leak Test. For additional information, refer to the Bosch Motronic ME 7.5 OBD System Strategy. Page 17.		30%	Refer to DTC P0441 in the DTC summary table. Additional exhaust regulation .

If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTCs or the corresponding diagnostic repair procedure → Mode 03: Interrogating fault memory .
Switch the ignition off.