Display group 23 -ignition- knock control

WARNING: This page is about a different variant/trim than selected.

Display group 23 -ignition- knock control
Driving operation
Read Measuring Value Block 23			→	← Indicated on display:
xxxx/min	x.xx %	xx.x ° Crankshaft rotation	xx.x ° Crankshaft rotation
1	2	3	4	← Display fields	Specified value	Evaluation
				Ignition timing angle retarding cylinder 4 via knock control	0.75 to 12.0 ° Crankshaft rotation	Refer to Evaluation display groups 22/23, display fields 3 and 4 - ignition timing angle retarding
			Ignition timing angle retarding cylinder 3 via knock control		0.75 to 12.0 ° Crankshaft rotation	Refer to Evaluation display groups 22/23, display fields 3 and 4 - ignition timing angle retarding
		Engine load			15 - 150%	---
	Engine speed (idle speed) Manual transmission Automatic transmission				700 to 6800 RPM 640 to 6800 RPM	Refer to Evaluation display group 1, display field 1 - engine speed (idle speed)

Note for display fields 3 and 4:

At idle, indicated value should be 0.0 ° Crankshaft rotation.