Deceleration shut-off valve, checking
WARNING: This page is about a different variant/trim than selected.
Special tools, testers and auxiliary items required
- Hand vacuum pump V.A.G 1390
Test conditions
- Performance deficiency or load change shocks
Test sequence
NOTE:
- Deceleration shut-off valve is located in front of turbocharger. It is opened by vacuum during deceleration and at idle.
Fig 2: Hand Vacuum Pump V.A.G 1390 Connect To Vacuum Connection Of Deceleration Shut-Off Valve In Proper Direction
- Connect Hand vacuum pump V.A.G 1390 to vacuum connection of deceleration shut-off valve.
- Operate Hand vacuum pump V.A.G 1390. Deceleration shut-off valve must open in direction of - arrow -.
- Operate ventilation valve at Hand vacuum pump V.A.G 1390. Deceleration shut-off valve must close
If deceleration shut-off valve does not open or does not close, replace valve.
NOTE:
- Connections of deceleration shut-off valve are to be fastened with screw-type clamps.