LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Golf GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (1.9L - TDI Engine Mechanical - ALH (A4 Platform)) >> 13 - Engine - Crankshaft, Cylinder Block >> Piston and connecting rod, disassembling and assembling >> Piston and connecting rod, disassembling and assembling >> Installed position of piston and piston/cylinder allocation

Installed position of piston and piston/cylinder allocation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Installed position of piston and piston/cylinder allocation
GW00000319Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pistons in cylinder 1 and 2:

Larger intake valve chamber points toward flywheel - arrows  -

Pistons in cylinder 3 and 4:

Larger intake valve chamber points toward belt pulley side - arrows  -

NOTE:
  • New piston/cylinder allocations are shown by a colored mark on the piston crown.
  • Pistons for cylinder 1 and 2: marked 1/2
  • Pistons for cylinder 3 and 4: marked 3/4