Engine code AEG
WARNING: This page is about a different variant/trim than selected.
- Engine code BBW. Refer to Engine code BBW
- Engine codes AVH, AZG, BEV. Refer to Engine codes AVH, AZG, BEV
NOTE:
Checking for leaks in (EVAP) system. Refer to Adapting components and functions
, Adapting functions and components
1 - O-ring
- Replace if damaged
2 - Breather line
- Black
- Check if seated securely
- Press together at front to release
- To change-over valve. Refer to Engine codes AEG, AVH, AZG, BEV , item 11
3 - Breather line
- White
- Check if seated securely
- Press together at front to release
- To pressure retention valve. Refer to Engine codes AEG, AVH, AZG, BEV , item 12
4 - Securing bolt, 3 Nm
5 - Connecting hose
- Pressure side
6 - Connector
- Black, 3-pin
7 - Vacuum hose
- To intake manifold. Refer to EVAP system, assembly overview , item -6-
8 - Leak Detection Pump (LDP) -V144-
- In right rear wheelhousing, behind wheelhousing liner
- Pump will be activated by engine control module (pulsed)
9 - Air cleaner for leak detection pump
10 - Connecting hose
- Suction side
11 - Bracket
- Secured on (EVAP) filter
12 - 10 Nm
13 - Evaporative Emissions (EVAP) canister
- In right rear wheelhousing, behind wheelhousing liner