Transmission, Securing To Engine And Transmission Holder VAS 6095 or Holding Fixture VW 313

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2006 Volkswagen Golf, 2006 Volkswagen GTI, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2005 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Lifting tackle 2024 A
Hook 10 - 222 A /2
Eye bolt 3368
Transmission bracket T10316
Engine and Transmission Holder VAS 6095

If necessary, clean outside surface of transmission.
Bolt transmission bracket T10316 to transmission.
Set down transmission, remove from hoist and turn torque converter housing upwards.

Fig 1: Installing Eye Bolts 3368 Into Torque Converter Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Install eye bolts 3368 into torque converter housing.
Raise transmission using lifting tackle 2024 A and secure to engine and Engine and Transmission Holder VAS 6095 or Holding Fixture VW 313.

Never turn transmission without care.

Fig 2: Attention (The Torque Converter Could Fall Out)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

The torque converter could fall out.

For information on disassembling transmission on stand, see Transmission, disassembling and assembling .