Front flexible disc, removing and installing: Installing

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

Installation is reverse of removal, note the following:

Installed position of front flexible disc

Fig 1: Identifying Shielding Plate

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Shielding plate - arrow - points toward intermediate bearing.
Three projecting sleeves each on transmission flange and on driveshaft flange grip into mounting holes of flexible disc.

Fig 2: Identifying Sealing Rings In Driveshaft Flanges

Courtesy of VOLKSWAGEN UNITED STATES, INC.

NOTE:

Sealing rings in driveshaft flanges must not be damaged when removing and installing.
Replace driveshaft if damaged.
Slide front driveshaft tube on guide pin horizontally.