Pressing on CV joint

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pressing On CV Joint Using Special Tools

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Press on carefully.
Tighten press block V.A.G 40-204A. Driveshaft must not be pressed downward in press block V.A.G 40-204A , otherwise there may be damage to paint.

In case of damage to paint, repair as follows:

Remove grease residue using nitro-thinner L 001 600. Apply 2-component acrylic paint ALN 769 041 with hardener ALZ 009 001.