LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Golf GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (6 SPD. Manual Transmission 02Y All Wheel Drive) >> 39F - Final drive, front differential >> Shaft and head bevel gear (gear set), adjusting >> Head bevel gear, adjusting >> Determining thickness of adjustment shim S 1* >> Notes

Determining thickness of adjustment shim S 1*: Notes

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Initial shim S 1* is replaced with final shim S 1 after backlash has been determined.
  • The total shim thickness "S total remains unchanged.

S 1* = S total - S 2*

scientia non olet · About LEMON Manuals