LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Golf GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (2.8L - Engine Mechanical, Engine Code: BDF) >> 15 - Engine - Cylinder Head, Valvetrain >> Valve gear, servicing >> Valve seats, reworking >> The maximum permissible reworking dimension is calculated as follows:

The maximum permissible reworking dimension is calculated as follows:

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, 2003 Volkswagen Jetta, and 2003 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If the valve is to be replaced as part of a repair, use a new valve for the measuring.
Fig 1: Identifying Distance Between End Of Valve Stem And Upper Edge Of Cylinder Head
GW00000505Courtesy of VOLKSWAGEN UNITED STATES, INC.
scientia non olet · About LEMON Manuals