LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Golf GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (2.8L - Engine Mechanical, Engine Code: BDF) >> 15 - Engine - Cylinder Head, Valvetrain >> Valve gear, servicing >> Valve guides, checking >> Test sequence

Test sequence

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, 2003 Volkswagen Jetta, and 2003 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking Valve Guides
GW00000504Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • The end of the valve stem must be flush with the guide. Due to the slight difference in stem diameters, ensure that only an intake valve is used in the intake guide and an exhaust valve in the exhaust guide.

If rock tolerance is exceeded: