Coolant pump, removing and installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Volkswagen Jetta, 2002 Volkswagen GTI, 2001 Volkswagen Jetta, 2001 Volkswagen GTI, and 2000 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Drain coolant, refer to Coolant, draining and filling .
Remove V-belt, refer to Ribbed V-belt, removing and installing .

Fig 1: Retaining Screws And Coolant Pump Pulley

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove retaining screws - 1 - of pulley for coolant pump - 2 - and remove pulley.

NOTE:

Use the pin wrench 3387 for removing and installing the coolant pump pulley.

Fig 2: Retaining Screws And Coolant Pump

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove coolant pump retaining bolts - 1 - and remove coolant pump - 2 -.