Coolant pump, removing and installing: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Volkswagen Jetta, 2002 Volkswagen GTI, 2001 Volkswagen Jetta, 2001 Volkswagen GTI, and 2000 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Reassembly is in reverse order, but note the following:

NOTE:

The coolant pump sealing plug points downward.

Moisten new O-ring with coolant.
Insert coolant pump into engine block and tighten retaining bolts to 15 Nm.
Install V-belt, refer to Ribbed V-belt, removing and installing .
Fill with coolant, refer to Coolant, draining and filling .