Cylinder head, removing and installing: Notes

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Installing

Fig 1: Identifying Special Tools - Cylinder Head, Removing And Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools, testers and auxiliary items required

Camshaft bar T10068 A
Drip tray V.A.G 1306
Torque wrench V.A.G 1331
Torque wrench V.A.G 1332

Spring-type clip pliers VAS 5024A
Lifting tackle 3033

Fig 2: Puller T10095 A

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Puller T10095 A

Fig 3: Shop Crane VAS 6100

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Shop crane VAS 6100
AMV 176 501 Sealing compound
AMV 174 004 01 Sealing compound

Requirements

The engine must be no more than warm to touch.