LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Golf GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (3.2L VR6 4V Engine Mechanical, Fuel Injection Ignition, Engine Code(S): BJS) >> 13 - Engine - Crankshaft, Cylinder Block >> Engine, disassembling and assembling >> Part II: Crank drive, assembly overview >> To loosen and tighten securing bolt, hold vibration damper with counter-holder T10069

To loosen and tighten securing bolt, hold vibration damper with counter-holder T10069

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Loosening/Tightening Securing Bolt, Using Counter-Holder T10069 To Hold Vibration Damper
GW00000436Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • Vibration damper securing bolt must be replaced.
  • Tighten securing bolt with torque wrench V.A.G 1601.
scientia non olet · About LEMON Manuals