LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Golf GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (1.9L - TDI Engine Mechanical, Fuel Injection Glow Plug, Engine Code(S): BEW (A4 Platform)) >> 13 - Engine - Crankshaft, Cylinder Block >> Piston and connecting rods, servicing >> Piston rings, checking >> Checking ring-to-groove clearance

Checking ring-to-groove clearance

WARNING: This page is about a different car, the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required 

Work sequence 

Fig 1: Identifying Ring Gap Using Feeler Gauge
GW00000053Courtesy of VOLKSWAGEN UNITED STATES, INC.
Piston ring Dimensions in mm new Wear limit
1. Compression ring 0.06 to 0.09 0.25
2. Compression ring 0.05 to 0.08 0.25
Oil scraper ring 0.03 to 0.06 0.15
scientia non olet · About LEMON Manuals