LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Golf GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (2.8L VR6 2V Engine Mechanical - AAA (A3 Platform)) >> Engine - Cylinder Head, VALVETRAIN >> Cylinder head cover, removing and installing >> Fitting position of the crankcase breather hose on cylinder head cover

Fitting position of the crankcase breather hose on cylinder head cover

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, 1998 Volkswagen GTI, and 1997 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

The marking on the breather hose must align with the marking on the cylinder head cover -arrows-.

Fig 1: Identifying Fitting Position Of Crankcase Breather Hose On Cylinder Head Cover
G03365178
scientia non olet · About LEMON Manuals