Checking the Inner Race for 1st Gear and 2nd Gear for Wear

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Checking 1St, 2Nd And 3Rd Gear Inner Ring For Wear

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the inner race onto taper of selector gear and then measure gap dimension -a- with a feeler gauge.

Gap Dimension -a-	Installed Dimension	Wear Limit
1st and 2nd gear	0.75 to 1.25 mm	0.3 mm