Transverse link, removing and installing: Notes

Special tools, testers and auxiliary items required

Fig 1: Tensioning Strap T10038

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Tensioning Strap T10038

Fig 2: Wheel Hub Support T10149

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Wheel Hub Support T10149

Fig 3: Measuring Center Of The Wheel To The Lower Edge Of The Wheelhouse

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Take a measurement - a  - with a tape measure from the center of the wheel to the lower edge of the wheelhouse.
• Make a note of the measurement. This is necessary to tighten the bolts for the rear axle to the bearing bracket.