Control arm, removing and installing: Removing

• Remove wheel.
• Remove noise insulation.
• For four wheel drive vehicles, the coupling link for vehicle Left Front Level Control System Sensor G78 on front axle must be disconnected from the control arm bracket before removing the left control arm → Left Front Level Control System Sensor G78 on front axle R32  .
• Mark installation position of nuts from ball joint to control arm.

Fig 1: Control Arm And Hex Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove nuts - arrows  -.
• Remove hex bolts - 1  - and - 2  - and take out control arm.