Selectable functions, overview
| Reference | |
| 01 - Check Control Module Version | Check Control Module Version |
| 02 - Check DTC Memory | Check DTC Memory |
| 03 - Output Diagnostic Test Mode | Output Diagnostic Test Mode (DTM), vehicles from 06.01 on |
| 05 - Erase DTC memory | Erase DTC memory |
| 06 - End Output | End Output |
| 07 - Code Control Module | Convenience System Control Module, coding |
| 08 - Read Measuring Value Block | Read measuring value block, vehicles from 06.01 on |
| 10 - Adaptation | Adaptation |
NOTE:
- A list of possible functions is printed out after pressing the HELP button.
- Do not select further functions, which can be printed out after pressing the HELP button.
- After the function is completed the V.A.G 1551 returns to the following start position:
Indicated on display:
| Rapid data transfer HELP Select function XX |