Installing PTFE-version sealing ring

WARNING: This page is about a different variant/trim than selected.

NOTE:

Before installing, remove oil remains from crankshaft journal with a clean cloth.

Fig 1: Identifying Guide Sleeve From Assembly Tool T10053 & Crankshaft Journal

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 2: Pressing Oil Seal Using Assembly Tool T10053 And Bolt T10053/2

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Press in oil seal using assembly tool T10053 and bolt T10053/2 (M16 x 1.5 x 60) up to stop.
Toothed belt, installing, tensioning. Refer to Toothed belt, removing, installing and tensioning .