Position of relays in protective housing (on left in engine compartment)
WARNING: This page is about a different variant/trim than selected.
1 - Secondary Air Injection (AIR) pump relay -J299-, Distinguishing features: Control number 100
NOTE:
- The relay locations may differ depending on equipment level.
For latest control numbers and component locations:
Refer to Electrical Wiring Diagrams, Troubleshooting & Component Locations
- Disconnect battery Ground strap first if tools are required to pull relays or control modules out of the relay plate.
- Before disconnecting the battery Ground strap obtain code for radios with anti-theft coding.