Vehicles with manual transmission

WARNING: This page is about a different variant/trim than selected.

Special tools and equipment

Fig 1: V.A.G 1788/10 Speed Adjuster Tool

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Work sequence

Hook accelerator cable into accelerator pedal and quadrant on throttle valve control module.
Pull off retaining clip for accelerator cable core wire.
Depress accelerator pedal into wide open throttle position.

NOTE: Have a second technician depress the accelerator pedal or use speed adjuster tool V.A.G 1788/10 supported against the steering wheel.

Adjust accelerator cable by moving retainer at support bracket so that wide open throttle position is attained at throttle valve control module.