LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2000 >> Golf GLS, 1.8 B, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform)) >> 15 Engine - Cylinder head, Valvetrain >> Valve gear, servicing >> Assembly overview >> Reworking cylinder head sealing surface

Reworking cylinder head sealing surface

WARNING: This page is about a different variant/trim than selected.
Fig 1: Reworking cylinder head sealing surface
GW00000100Courtesy of VOLKSWAGEN UNITED STATES, INC.

Cylinder head reworking dimension:

a = At least 132.6 mm

NOTE: When the sealing surface has been reworked, the valves must be set deeper by the same amount.
scientia non olet · About LEMON Manuals