LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2000 >> Golf GLS, 1.8 B, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform)) >> 15 Engine - Cylinder head, Valvetrain >> Cylinder head, removing and installing >> Assembly overview >> Checking cylinder head for distortion

Checking cylinder head for distortion

WARNING: This page is about a different variant/trim than selected.
Fig 1: Checking cylinder head for distortion
GW00000061Courtesy of VOLKSWAGEN UNITED STATES, INC.

Max. permissible distortion: 0.1 mm (minimum distance between linear measurements: 100 mm)

scientia non olet · About LEMON Manuals