LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2000 >> Golf GLS, 1.8 B, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (6 SPD. Manual Transmission 02Y All Wheel Drive) >> 39R - Final drive, rear differential >> Shaft and head bevel gear (gear set), adjusting >> Head bevel gear, adjusting >> Preload of tapered roller bearing for differential, setting >> Example:

Preload of tapered roller bearing for differential, setting: Example:

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

"S total " = S 2 + measurement result + preload

Inserted shim(s) S 2 1.00 mm
Measurement result (example) +0.90 mm
Pre-load (constant) +0.30 mm
S total = 2.20 mm
scientia non olet · About LEMON Manuals