Available adjustment shims for S 1
WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
| Shim thickness (mm) | ||
| 0.65 | 0.90 | 1.15 |
| 0.70 | 0.95 | 1.20 |
| 0.75 | 1.00 | 1.25 |
| 0.80 | 1.05 | |
| 0.85 | 1.10 | |
- Allocate adjustment shim(s) via replacement parts catalog.
- Install determined shim S 1 .
2 shims corresponding to the measured value may be installed.
Different tolerances make it possible to measure the required shim size exactly.
- Press in outer race again.
- Install cover.