Sealing ring for driveshaft flange on rear final drive, replacing (final drive removed): Notes
WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
Special tools, testers and auxiliary items required
Fig 1: Identifying Special Tools - Sealing Ring For Driveshaft Flange On Rear Final Drive, Replacing (Final Drive Removed)
- Holding plate VW 309
- Engine support adapter VW 353
- Transmission holder V.A.G 2004
- Extractor lever VW 681
- Thrust piece T10019
- Torque wrench V.A.G 1601