LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2000 >> Golf GLS, 1.8 B, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (6 SPD. Manual Transmission 02Y All Wheel Drive) >> 39R - Final drive, rear differential >> Rear final drive, disassembling and assembling >> Cover for Haldex clutch / disc housing, removing and installing >> Pressing grooved ball bearing into cover for Haldex clutch

Pressing grooved ball bearing into cover for Haldex clutch

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressing Grooved Ball Bearing Into Cover For Haldex Clutch Using Special Tools
GW00002003Courtesy of VOLKSWAGEN UNITED STATES, INC.
scientia non olet · About LEMON Manuals