LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2000 >> Golf GLS, 1.8 B, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (6 SPD. Manual Transmission 02Y All Wheel Drive) >> 39F - Final drive, front differential >> Shaft and head bevel gear (gear set), adjusting >> Head bevel gear, adjusting >> Preload of tapered roller bearing for differential, setting (friction torque) >> Example:

Preload of tapered roller bearing for differential, setting (friction torque): Example:

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

S total = S 2* + measurement result + pre-load

Inserted shim(s) S 2* 1.75 mm
Measurement result (example) +0.75 mm
Pre-load (constant) +0.20 mm
S total = 2.70 mm
scientia non olet · About LEMON Manuals