Table of adjustment shims

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

	Thickness (mm)
1.50	1.80	2.10
1.55	1.85	2.15
1.60	1.90	2.20
1.65	1.95	2.25
1.70	2.00
1.75	2.05

Different tolerances make it possible to measure the required shim size exactly.

Fig 1: Pressing Tapered Roller Bearing Outer Race Into Transmission Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Press in tapered roller bearing outer race with determined shim (1.65 mm in example). Support transmission housing directly beneath bearing mount using thrust piece 2050.