Checking 1st, 2nd and 3rd gear inner races for wear
WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLKSWAGEN UNITED STATES, INC.
- Press inner race onto cone of gear wheel and measure gap dimension - a
- using a feeler gauge.
| Gap dimension "a " |
Installed dimension |
Wear limit |
| 1st, 2nd and 3rd gear |
0.75 to 1.25 mm |
0.3 mm |