LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2000 >> Golf GLS, 1.8 B, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (6 SPD. Manual Transmission 02Y All Wheel Drive) >> 34 - Manual Transmission - Controls, Housing >> Transmission, disassembling and assembling >> Input shaft, output shafts (pinion shafts), differential, bevel gear transfer case and selector rods, removing and installing >> Installed position of complete shift mechanism in transmission, up to transmission manufacture date 180503:

Installed position of complete shift mechanism in transmission, up to transmission manufacture date 180503:

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installed Position Of Complete Shift Mechanism In Transmission (Up To Manufacture Date 180503)
GW00001611Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Shift fork for 3rd and 4th gears

2 - Shift fork for 1st and 2nd gears

3 - Shift fork for reverse gear

4 - Shift fork for 5th and 6th gears

5 - Selector shaft

Lower selector shaft bearing - arrow  - is bolted with cap to transmission housing.

scientia non olet · About LEMON Manuals