Removing and installing locking washer

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Locking Washer, Spacer Bushing & Stop

GW00001779

Courtesy of VOLKSWAGEN UNITED STATES, INC.

To remove and install locking washer - arrow A - , press spacer bushing - arrow B - to stop in direction of arrow - arrow C - using a small screwdriver and pull out locking washer.

NOTE:

Do not bend bushing while pressing down.
Mounting slot in shift lever for locking washer must be visible.
Carefully release tension on spring.