Clutch pedal, removing and installing: Removing
WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
- Rotate Clutch vacuum vent valve switch -F36- 45 ° toward left and remove from mounting.
- Remove over-center spring → Over-center spring, removing and installing .
- Separate clutch pedal from master cylinder → Master cylinder, removing and installing and press operating rod to engine compartment up to stop.
- Remove nut - A -.
- Loosen bolt until clutch pedal can be removed.