LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2000 >> Golf GLS, 1.8 B, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (2.8L - Engine Mechanical, Engine Code: BDF) >> 13 - Engine - Crankshaft, Cylinder Block >> Piston and connecting rod, disassembling and assembling >> Piston and connecting rod, disassembling and assembling >> Checking cylinder bores

Checking cylinder bores

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, 2003 Volkswagen Jetta, and 2003 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking Cylinder Bores
GW00000455Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools, testers and auxiliary items required 

Test sequence 

NOTE:
  • The cylinder bores must not be measured if the cylinder block is mounted on a repair stand with engine bracket 3269 or engine bracket VW 540 , as incorrect measurements would then result.
scientia non olet · About LEMON Manuals