LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2000 >> Golf GLS, 1.8 B, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (1.9L - TDI Engine Mechanical, Fuel Injection Glow Plug, Engine Code(S): BEW (A4 Platform)) >> 21 - Turbocharger, G-Charger >> Charge air system with turbocharger >> Turbocharger with attachments, removing and installing >> Installation notes

Installation notes

WARNING: This page is about a different car, the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Observe safety precautions. Refer to Safety precautions  .

Observe rules for cleanliness. Refer to Rules for cleanliness  .

NOTE:
  • All hose connections secured by clips.
  • The charge air system must be free of leaks.
  • Do not install hose connections with lubricant containing oil.
  • For assembly use lubricating agent (water without additive) if necessary. Do not use lubricating agents containing oil.
  • When repairing remove oil from connections and hose ends.
  • Before connecting oil supply line fill turbocharger at connection with engine oil.
  • After installing turbocharger run engine for approx. 1 minute at idling speed, do not rev engine. This ensures that the turbocharger is adequately lubricated.
  • Replace self-locking nuts.
scientia non olet · About LEMON Manuals