Crankshaft oil seal - belt pulley end, replacing: Installing

WARNING: This page is about a different car, the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The oil seal sealing lip must not be additionally oiled or greased.

Remove oil residue from crankshaft journal using clean cloth.

Fig 1: Identifying Guide Sleeve T10053/1

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Mount guide sleeve T10053/1 onto crankshaft journal.
Slide oil seal over guide sleeve onto crankshaft journal.

Fig 2: Identifying Press Sleeve T10053

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Using press sleeve T10053 , press oil seal onto stop with center bolt.
Install toothed belt and tension. Refer to Toothed belts, removing, installing and tensioning .