Installation with older style head gasket ONLY
WARNING: This page is about a different car, the 1999 Volkswagen Jetta, 1998 Volkswagen Jetta, 1997 Volkswagen Jetta, 1996 Volkswagen Passat, and 1996 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Tighten according to above four stage sequence.
- After final assembly, run engine until completely warm-oil temperature at least 50 °C (122 °F)- and tighten bolts additional 1/4 -turn (90°).
- Do not loosen bolts first
- Follow tightening sequence
- Tighten each bolt in one step, without interruption
- It is NOT necessary to re -torque cylinder head bolts after the first 1,000 km (600 mi).