Left front power window switch -E40- (Jetta only), removing and installing: Removing

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Carefully pry off upper trim of door grab handle.
Remove window switch connector.
Squeeze switch retaining tabs (arrows) and remove switch.

Fig 1: Removing & Installing Left Front Power Window Switch (Jetta Only)

Courtesy of VOLKSWAGEN OF AMERICA, INC.