Turn signal bulb, removing and installing
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
- Twist bulb holder counter-clockwise -arrow- and remove from turn signal housing.
- Remove bulb from holder.
When installing, twist the bulb holder clockwise, opposite the direction shown, until the holder locks into turn signal housing.