LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2000 >> Golf GLS, 1.8 B, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (2.8L & 3.2L - Generic Scan Tool, Engine Code(S): AFP, BDF, BJS [A4 Platform] (20 Fuel Supply - 26 Exhaust System, Emission Controls)) >> 26 Exhaust system, Emission controls >> Exhaust system components, removing and installing >> Muffler with mounts (vehicles with engine codes BJS) >> Installation position of double clamps in direction of travel

Installation position of double clamps in direction of travel

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen R32, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installed Location Of Double Clamp, In Driving Direction
GW00000570Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Screw tips must not project beyond the lower edge of the double clamp.

2 - Angle 10 ° to 15 °

scientia non olet · About LEMON Manuals