Airbag spiral spring, removing and installing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen Golf, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, and 1998 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect single connectors from airbag spiral spring -F138-.
Remove Phillips-head screws -1- and remove airbag spiral spring -2- from steering wheel.
NOTE:
- The steering wheel must be in the center position (wheels straight ahead) when the airbag spiral spring -F138- is removed and installed.
- Replacement airbag spiral springs are secured in the center position with a cable tie.

Fig 1: Removing Phillips-Head Screws And Airbag Spiral Spring From Steering Wheel