Front seat, assembly overview (2-door)
NOTE:
- When replacing backrest in vehicles without "Easy Entry" equipment, the hook for "Easy Entry" mechanism must be drilled off.
1 - Seat trim
- Right front
2 - Screw
3 - Seat trim
- Right rear
4 - Seat
5 - Backrest
6 - Transfer rod
- For backrest adjustment
7 - Adjustment knob
- For lumbar support
8 - Seat trim
- Rear left
9 - Spacer ring
10 - Adjustment knob
- For backrest
11 - Cover cap
- Qty. 2
12 - Screw
- Qty. 2
13 - Adjusting lever
- For seat height
14 - Seat trim
- Left front
15 - Seat height adjusting element
16 - Tension spring
- Qty. 2
17 - Screw